zetec engine tdc

Ford Cam / Crankshaft TDC Timing Peg
Code: OTC-6475

can be used on the following Ford Models: Year Model Engine Ford Am. Part No. Global Part No. 1997-2002 Contour 2.0L 4cyl. DOHC Zetec T97P-600-A 303-574 1997-2002 Mystique 2.0L...

Quantity:

Crank Shaft TDC Timing Peg (Ford Zetec)
Code: OTC-303-574

Crankshaft Timing Peg (Ford) No. OTC-303-574 Crankshaft Timing Peg (Ford) Crankshaft Timing Peg (Ford) Applications: 2.0L Zetec Past Tool Number: T97P-6000-A

Quantity:

Ford Cam Timing Tool Kit for Zetec Engines
Code: OTC-6486

Zetec engines in Contour/Mystique. Contains tools 6474 and 6475... A camshaft can be timed in affected, and the vehicle’s “check engine� light may come on at some...

Quantity:

Ford Crankshaft Tdc Holding Tool
Code: OTC-6479

Ford Crankshaft Holding Tool No. OTC-6479 Ford Crankshaft Holding Tool OTC Ford Cam Tools ensure correct cam timing when servicing timing belts, chains, head gaskets or other valve train repairs....

Quantity:

Tdc Crank Locking Pin
Code: ASM-3242

Locking Pin VW/Audi No. ASM-3242 Assenmacher Locking Pin VW/Audi Assenmacher Locking Pin VW/Audi Applications: Used to lock the crankshaft in T.D.C. position on VW/Audi 2.7L and 2.8L V-6...

Quantity:

20in, 64cc. Chain Saw (3/8in - .050in) w/ Low Emission Engine
Code: MKT-DCS642120

Specifications: Engine (cu.in.) 3.9 Displacement (cc.) 64 Max. Engine Speed 13,500 RPM Power Rating (kW/BHP) 3.5/4.7 Fuel Tank Capacity (oz.) 25.4 Oil Tank...

Quantity:

18in, 46cc. Chain Saw (3/8in - .050in)
Code: MKT-DCS46018

46 cc 18in Chain Saw No. MKT-DCS46018 46 cc 18in Chain Saw 46 cc 18in Chain Saw Features: Dependable and easy starting High power-to-weight ratio with 2.9 HP engine Automatic half...

Quantity:

18in, 50cc. Chain Saw (3/8in - .050in)
Code: MKT-DCS51018

50 cc 18in Chain Saw No. MKT-DCS51018 50 cc 18in Chain Saw 50 cc 18in Chain Saw Features: High power-to-weight ratio with 3.2 HP engine Automatic half throttle lock for easy starting...

Quantity:

20in, 50cc. Chain Saw (3/8in - .050in)
Code: MKT-DCS51020

50 cc 20in Chain Saw No. MKT-DCS51020 50 cc 20in Chain Saw 50 cc 20in Chain Saw Features: High power-to-weight ratio with 3.2 HP engine Automatic half throttle lock for easy starting...

Quantity:

14in, 33cc. Chain Saw (3/8in - .050in) (CA restricted)
Code: MKT-DCS34

Efficient cold weather operation Double air filtration High power-to-weight ratio 1-year warranty on tool Specifications: Engine (cu.in.) 2.0 Displacement (cc) 33 Max...

Quantity:

20in, 64cc. Chain Saw (3/8in - .050in)
Code: MKT-DCS640120

filtration High power-to-weight ratio 1-year warranty Specifications: Engine (cu.in.) 3.9 Displacement (cc.) 64 Max Engine Speed (RPM) 13,500 Power Rating kW...

Quantity:

Compression TDC Whistle Alert 14mm (Ridged)
Code: IPA-7882

Compression TDC Whistle Alert 14mm (Ridged) No. IPA-7882 Compression TDC Whistle Alert 14mm (Ridged) No more burning fingers and hands! Just listen for the whistle to find the...

Quantity:

Crankshaft Timing Peg
Code: OTC-303-507

Crankshaft TDC Timing Peg No. OTC-303-507 Crankshaft TDC Timing Peg Crankshaft TDC Timing Peg Applications: 2.3L Engine

Quantity:

Engine Calibration and Set-up Kit
Code: IPA-7891

and general engine setup. Kit Includes: Standard 6.25" (14mm) and Extended 10.75" (14mm) TDC Indicators, Compression Gauge Extension, Compression Whistle Alert (rigid and flex)...

Quantity:

Ford Cam Alignment Tool
Code: OTC-6474

may come on at some point. NOTE: Some applications require more than one tool to accomplish the task. Ford Am. Part No.: T94P-6256-CH Year Model Engine Tool Description Global Part No....

Quantity:

Ford Cam Tool Service Master Set
Code: OTC-6489

in the 6489 Master Kit covers 1992 thru 2002 applications and comes in a molded storage case. Ensure proper cam timing when you replace a head gasket, replace a timing belt or chain, or complete any...

Quantity:

CAMshaft Alignment Bar For (2V) V-6
Code: ASM-3243

Camshaft Alignment Tool VW/Audi No. ASM-3243 Assenmacher Camshaft Alignment Tool VW/Audi Assenmacher Camshaft Alignment Tool VW/Audi Applications: Used to hold camshafts at T.D.C. position....

Quantity:

CAMshaft Alignment Bar For (5V) V-6
Code: ASM-3391

Camshaft Alignment Tool for VW and Audi No. ASM-3391 Camshaft Alignment Tool for VW and Audi Camshaft Alignment Tool for VW and Audi Features: Used to hold both camshafts in T.D.C. position....

Quantity:

Crank Stop (For Oval Pulley)
Code: ASM-T10100

engine, 2 and 4-valve diesel engines equipped with an oval crankshaft pulley, to adjust valve timing (TDC marking at 1 o'clock). Use of the oval belt pulley will be...

Quantity:

Remote Starter
Code: ACT-CP7853

Actron Remote Starter Switch No. ACT-CP7853 Actron Remote Starter Switch Actron Remote Starter Switch Allows one person to start or crank engine from under the hood. Ideal for compression...

Quantity:

Crankshaft Stop
Code: ASM-T10050

T 10115 Lock Pins. Applications: Used to lock the crankshaft in T.D.C. position on VW/Audi 2.7L and 2.8L V-6 engines.

Quantity:

Heavy-Duty Remote Starter
Code: ACT-CP7854

for compression test or bumping engine onto TDC (top dead center) timing marks for valve, distributor or camshaft adjustment. Convenient hot circuit red indicator light glows when...

Quantity:

VW/Audi Crankshaft Locking Pin
Code: ASM-T40069

VW/Audi Crankshaft Locking Pin No. ASM-T40069 VW/Audi Crankshaft Locking Pin VW/Audi Crankshaft Locking Pin Features: Locking pin to lock crankshaft at T.D.C. Applicable to VW/Audi...

Quantity: