king pin install tool

30-Ton King Pin Pusher
Code: OTC-4241

With tooling in position, up to 30 tons of hydraulic force is applied…even the most tightly “frozen� king pin is eased out. A job that could consume the better part...

Quantity:

King Pin & Brake Anchor Pin Pusher Press
Code: OTC-4240

Truck King Pin & Brake Anchor Pin Pusher With Hydraulics No. OTC-4240 Truck King Pin & Brake Anchor Pin Pusher With Hydraulics Hydraulic force...

Quantity:

King Pin-Pusher Head
Code: OTC-43104

Quantity:

Drive Pin Installing Tool
Code: OTC-5045

Drive Pin Installing Tool No. OTC-5045 Drive Pin Installing Tool Makes for precise alignment and proper installation of the spacer plate...

Quantity:

Manual Stud & Anchor Service Kit
Code: TGR-16001

Manual Stud & Anchor Service Kit No. TGR-16001 Manual Stud & Anchor Service Kit Features: Virtually eliminates the risk of damaging hubs, seals, bushings, bearings, and wheel studs. Easily removes...

Quantity:

Belt Installation Tool
Code: OTC-7654A

is a lot less frustrating and timeconsuming. The two-pin hook end holds the belt for precise placement, and the handle gives you the grip you need to maneuver it around the pulleys easier....

Quantity:

Installer, Bar Pin Bushing
Code: OTC-49050

Quantity:

Brake Shoe Adjuster Pin Installer
Code: LOC-LT-760

Brake Shoe Adjuster Pin Installer No. LOC-LT-760 Brake Shoe Adjuster Pin Installer Brake Shoe Adjuster Pin Installer Features: The LT-760...

Quantity:

Wheel Stud and Brake Anchor Service Set
Code: TGR-10603

bearings, and axle studs! Maximum safety from accurate installations! For use on inboard hubs on trucks, semi-trucks, and buses. Only 14 lbs assembled weight for installation of...

Quantity:

Subaru Axle Pin Removal Tool
Code: LOC-LT730

Subaru Axle Pin Removal Tool No. LOC-LT730 Subaru Axle Pin Removal Tool Subaru Axle Pin Removal Tool Features: The LT-730 removes and...

Quantity:

U-Joint Removing - Installing Tool
Code: OTC-7248

U-Joint Removing/Installing Tool No. OTC-7248 U-Joint Removing/Installing Tool Features: This helpful tool uses a forcing-screw press to safely remove and...

Quantity:

Truck Brake Spring Installer
Code: LOC-LT880

Truck Brake Spring Installer No. LOC-LT880 Truck Brake Spring Installer Truck Brake Spring Installer Features: The LT-880 is a must have tool for 3/4- ton and...

Quantity:

Alternator Pulley Puller and Installer Set
Code: KDT-2897

Body Jaw and Sleeve Assembly, Jackscrew Button Bearing and Washer Puller Pin for Quad 4 Screw Installer for Quad 4 Puller Pin for GM 3.1 Screw Installer for Ford...

Quantity:

Cummins Injector Remover / Installer
Code: OTC-5040

Cummins Injector Remover / Installer No. OTC-5040 Cummins Injector Remover / Installer The best tool you can use to remove or install fuel injectors on Cummins L10...

Quantity:

Leaf Spring & Bushing Puller/Installer
Code: TGR-15001

Leaf Spring Pin & Bushing Kit No. TGR-15001 Leaf Spring Pin & Bushing Kit Removes & Installs rubber isolated pin bushings from the spring eye while the suspension...

Quantity:

Brake Spring Tool Lisle
Code: LIS-45100

Brake Spring Tool No. LIS-45100 Brake Spring Tool Features: Designed for import car drum brake return springs. The tool removes and installs return springs. Also...

Quantity:

Tensioner Release Tool
Code: ASM-V420

Belt Tensioner Release Tool Kit - Volvo No. ASM-V420 Assenmacher Belt Tensioner Release Tool Kit - Volvo Assenmacher Belt Tensioner Release Tool Kit - Volvo Features:...

Quantity:

Timing Belt Tensioner Locking Pins
Code: ASM-T10115

Tensioner Locking Pins (VW/Audi) No. ASM-T10115 Tensioner Locking Pins (VW/Audi) Tensioner Locking Pins (VW/Audi) Used to hold the timing belt tensioner in place while...

Quantity:

Truck Anchor Pin Bushing Driver Lisle
Code: LIS-28890

Anchor Pin Bushing Remover No. LIS-28890 Anchor Pin Bushing Remover Also Removes Truck Leaf Spring Bushings. Features: Pneumatic bushing driver set removes and installs...

Quantity:

Brake Spring Washer Tool Ford
Code: LIS-41100

into the spring clip. Then compress the spring with the tool and slide it off the brake pin. Reverse procedure to install.... Brake Spring Washer Tool for Ford...

Quantity:

Hendrickson Fabricated Bar Pin Adapter Set
Code: OTC-1757

Hendrickson Bar Pin Adapter Set No. OTC-1757 Hendrickson Bar Pin Adapter Set Servicing bar pin end bushings used on Hendrickson equalizing beam tandem truck suspensions...

Quantity:

Hendrickson Suspension Bar Pin Adapter Set
Code: OTC-1749

Hendrickson Suspension Bar Pin End Bushing Adapter Set No. OTC-1749 Hendrickson Suspension Bar Pin End Bushing Adapter Set Hendrickson Suspension Bar Pin End Bushing...

Quantity:

Heavy Duty Brake Spring Tool
Code: LIS-44800

Heavy-Duty Brake Spring Tool No. LIS-44800 Heavy-Duty Brake Spring Tool Designed for Larger Brake Springs. Features: The heavy-duty tool removes and installs...

Quantity:

Air Hammer Extra Heavy Duty - 1800bpm
Code: CPT-717

Positive action trigger for precise speed control. Applications: front end work, king pin removal, and installation of bulldozer walkingbeam bushings, removal of truck...

Quantity:

Steering Column Anti-Rotation Pin for GM
Code: OTC-J-42640

Steering Column Anti-Rotation Pin for GM No. OTC-J-42640 Steering Column Anti-Rotation Pin for GM Steering Column Anti-Rotation Pin for GM Features: Installed into...

Quantity:

Front Leaf Spring, Pin & Bushing Service Kit
Code: OTC-5080

Truck Front Leaf Spring, Pin & Bushing Service Kit No. OTC-5080 Truck Front Leaf Spring, Pin & Bushing Service Kit Truck Front Leaf Spring, Pin & Bushing Service Kit...

Quantity:

Ball Joint / Truck Brake Anchor Pin / U-Joint Press
Code: LIS-43620

Ball Joint / Truck Brake Anchor Pin / U-Joint Press No. LIS-43620 Ball Joint / Truck Brake Anchor Pin / U-Joint Press Tough Tool Makes easy Work of 3 Different Jobs....

Quantity:

Universal seal & clutch service tool set
Code: MTC-91340

90460 O-Ring Installation Guide 90462 Seal Seat Installer 90473 Seal Remover 90474 Seal Installer & Plate Alignment 90484 Seal Protector 90486 Ceramic Seal Seat Remover &...

Quantity:

BMW V8 Vanos Tensioner Pins
Code: ASM-BMW4631

Locking Pins (2) for Secondary Chain Tensioner on V8 Vanos No. ASM-BMW4631 Locking Pins (2) for Secondary Chain Tensioner on V8 Vanos Locking Pins (2) for Secondary Chain...

Quantity:

Puller Pin For GM 3.1 - Replacement Part for 2897
Code: KDT-2897-87

Puller Pin for GM 3.1 - Replacement Part for 2897 No. KDT-2897-87 Puller Pin for GM 3.1 - Replacement Part for 2897 Puller Pin for GM 3.1 - Replacement Part for 2897 Pulley...

Quantity: