ford front axle puller

Front Hub Puller & Installer Set
Code: OTC-6298

Front Hub Installer & Puller Set No. OTC-6298 Front Hub Installer & Puller Set Set contains three popular tools needed when servicing the axle shaft or...

Quantity:

Vses Axle Shaft Replacer
Code: OTC-J-45859

Front Hub Puller for 4WD Vehicles No. OTC-J-45859 Front Hub Puller for 4WD Vehicles For removal of the front hub assembly. Applications: Services: Most...

Quantity:

4-Wheel Drive Front Spindle Puller Impact Socket
Code: SUN-10208

For use when removing the front spindle on light duty 4WD trucks. Applicable to full size Ford, GM, International, and Jeep pick-ups with Dana front Axles. Also...

Quantity:

Front Hub Remover
Code: OTC-7208A

Front Hub Puller with Spare Locknut No. OTC-7208A Front Hub Puller with Spare Locknut Front Hub Puller with Spare Locknut Features: The OTC-7208A...

Quantity:

Ford Front Hub Installer 22mm
Code: OTC-7924A

Automotive Hub Installer 22mm No. OTC-7924A OTC Automotive Hub Installer 22mm Installer is used to pull the axle shaft into the front hub. Fits axle shafts with 22mm X 1.5...

Quantity:

Front Hub Puller for 4 Wheel Drive Vehicles OTC 6290
Code: OTC-6290

Front Hub Puller for 4WD Vehicles No. OTC-6290 Front Hub Puller for 4WD Vehicles For removal of the front hub assembly. Applications: Services: Most 1/2-,...

Quantity:

Ford Vacuum Seal Installer
Code: OTC-6695

Ford Axle Shaft Seal Installer No. OTC-6695 Ford Axle Shaft Seal Installer Features: Works on 1998-newer Ford F-250, F-350, F-450, and F-550 4X4s having...

Quantity:

Axle Shaft Seal Installer Lisle
Code: LIS-38060

Axle Shaft Seal Installer No. LIS-38060 Axle Shaft Seal Installer Drives The Axle Seal Into Place on the Vacuum Operated Front Axles on 1998 to 2004...

Quantity:

Front Hub Installer Automotive 20mm
Code: OTC-7135A

Front Hub Installer Automotive No. OTC-7135A Front Hub Installer Automotive Installer is used to pull the axle shaft into the front hubs on Ford vehicles....

Quantity:

1/2in. Drive Deep Axle Nut Socket - 29mm (GM, Ford)
Code: KDT-3907

1/2in. Drive Deep Axle Nut Socket - 29mm (GM, Ford) No. KDT-3907 1/2in. Drive Deep Axle Nut Socket - 29mm (GM, Ford) 1/2in. Drive Deep Axle Nut Socket -...

Quantity:

Wheel Knuckle Seal Installer, Ford Motorcraft
Code: OTC-205-830

Ford Motorcraft Wheel Knuckle Seal Installer No. OTC-205-830 Ford Motorcraft Wheel Knuckle Seal Installer Ford Motorcraft Wheel Knuckle Seal Installer Use with 205-440. ...

Quantity:

Slide Hammer Puller Set 9-Way
Code: OTC-4579

9-Way Slide Hammer Puller Set No. OTC-4579 9-Way Slide Hammer Puller Set Features: Pulls flange-type rear axles and most front-wheel drive hubs. Internal and...

Quantity:

CV Joint Inner Puller Complete Set
Code: OTC-7509

CV Joint Inner Puller Complete Set No. OTC-7509 CV Joint Inner Puller Complete Set CV Joint Inner Puller Complete Set This tool is a must when you are servicing outer tie...

Quantity:

Wrench, Spanner Locknut,Truck Front Wheel Bearing
Code: OTC-7158

1/2in. Sq. Drive Truck Front Wheel Bearing Locknut Socket No. OTC-7158 1/2in. Sq. Drive Truck Front Wheel Bearing Locknut Socket 1/2in. Sq. Drive Truck Front Wheel Bearing...

Quantity:

Universal Hub Puller (With Case)
Code: TGR-10903

Features: The 10903 will fit front steer, drive axle and trailer hubs including Conmet Preset, Dana-Spicer LMS and Meritor Unitized. It will also work on earlier style hubs. Kit...

Quantity:

Multi-Purpose Puller Set
Code: OTC-1181

includes: 1177 – Slide hammer puller with a 5 lb. hammer, 2-way and 3-way heads. Reversible: either two or three jaws may be used to handle both 'insidein. and 'outsidein. pulling jobs....

Quantity:

Ford F-450/550 Wheel Oil Seal Installer, 2005+
Code: OTC-6698

areas. Features: Correctly installs the seal onto the axle shaft and into the wheel knuckle, preventing front hub vacuum leaks that would cause the 4WD to not engage. Application:...

Quantity:

Ford F-250/350 Wheel Oil Seal Installer, 2005+
Code: OTC-6697

Ford F-250/350 Wheel Oil/Axle Shaft Seal Installer, 2005+ No. OTC-6697 Ford F-250/350 Wheel Oil/Axle Shaft Seal Installer, 2005+ Features: Works on 2005-newer...

Quantity:

OTC Slide Hammer Puller Set Ten-Way
Code: OTC-7948

1155 - Slide hammer w/5 lb. hammer No. 7372 - Rear axle pulling attachment No. 24544 - 3-way cross head No. 24545 - Cone No. 27241 - 2-way cross block No. 27315 - Puller hook...

Quantity:

Leaf Spring & Bushing Puller/Installer
Code: TGR-15001

8 trucks (Front rubber isolated suspension bushing #B65-1012 with a 2 1/16 O.D. & Threaded Bushing #B13-1002 with a 2 1/16 O.D.) Features: Standard shop charge out time on this job can be...

Quantity:

Wrench, Hi-Shear Locknut, Front Wheel Bearing 1/2in Sq. Dr.
Code: OTC-7270A

Bronco II with manual hubs 1986-1995 Ford F-series 1/2 ton truck & full size Bronco with Dana 44 front axle 1990-1993 Dodge trucks with Dana 44 automatic hubs......

Quantity:

Spindle Remover Adapter 4WD
Code: OTC-7502

4WD Front Spindle Puller No. OTC-7502 OTC 4WD Front Spindle Puller This puller enables you to remove the front spindle on light-duty 4WD trucks....

Quantity:

Spindle Nut Service Set
Code: KDT-41660

Lug 4WD Spindle Nut Socket 3/4 to 1 Ton Dana 44 - Remove and install 4 slot front axle locknuts on 1978-84 Ford F-Series 4WD heavy-duty 3/4 and 1 ton trucks; 1973-81 GM...

Quantity:

1/2in. Drive Locknut Socket 2-5/8in. (Ford, GM)
Code: SUN-284LN

for removal and installation of 4 slot front axle locknuts on 1978- 1984 Ford F-Series and 4WD heavy duty 3/4 and 1 ton trucks; 1973-81 GM 4WD 3/4in. and 1 Ton Trucks....

Quantity:

Spindle Remover Adapter FWD
Code: OTC-4543A-6

permits use with slide hammer. Fits spindle thread sizes 2in-16, 1-5/8in-16 and 38mm-1.5. Applications: Full-size GM, Ford, Jeep and International pickups with Dana front...

Quantity:

Discontinued
Code: OTC-7506

Front Wheel Drive Service Set No. OTC-7506 Front Wheel Drive Service Set Front Wheel Drive Service Set Tools to cover a variety of CV-joint and axle jobs. It...

Quantity:

6pc. 4WD Spindle Nut Socket Set
Code: OTC-4543A

Trucks. 4-lug socket for removing and installing 4-slot front axle locknuts on 1986- newer F-Series 1/2-ton trucks, full-size Bronco with Dana 44 axle, 1984-92...

Quantity:

Discontinued
Code: LIS-17850

Axle Seal Driver for Ford No. LIS-17850 Axle Seal Driver for Ford Installs Front Seals and Rear Axle Seals on Ford Vehicles. Features:...

Quantity:

3/4in Dr. Ratcheting Locknut Tool
Code: SUN-10636

alloy steel for maximum strength Small end fits Ford 1986 to 1994 light trucks with Dana 44 front axle. Large end fits 1985 and newer ford F-150 and F-350 trucks...

Quantity:

Ratcheting Lock Nut Tool Lisle
Code: LIS-28000

Ratcheting Lock Nut Tool No. LIS-28000 Ratcheting Lock Nut Tool Double-Ended for Both Sizes of Ratcheting Style Lock Nuts. Features: Two tools in one! Small end fits Ford 1986 to 1994 light...

Quantity: